Hikvision DS-7604NI-E1/A - web interface with ONLY live feeds?

[llama_thumper]

guys,

i have the above NVR (www.hikvision.com/europe/products_show.asp?id=9868) - is it possible to, through a web browser, access ONLY the live feeds by putting in the username/password? i am of course aware that you can access the NVR by doing so but then you also have access to all the settings, etc. i also saw a setting on that 'anonymous' access is possible (though this may have been in the settings for the cameras themselves), however I do want someone to have to put in the username/password before viewing the fees so this isn't an option for me.

many thanks in advance!

 

[alastairstevenson]

This may depend on the firmware version you are using. This was 3.3.4 on a 7816N-E2
I haven't tried this before - but with the user settings as in the screenshot below, the NVR menus seem to be normally visible, but any attempt to make and save changes outside the user profile results in a 'No permission' result.
I didn't try every single option - but on the face of it the configuration seems to be protected from change by this user.