Hikvision DS-7108N-SN / P Firmware

I

IanG

n3wb
May 31, 2016
16
0
Kitchener,Ontario CANADA
First I would like to say I did a lot of reading and did not find a exact answer for what I'm looking for. I would like to upgrade the firmware for my DS-7108N-SN / P to add newer features and possibly some stability. I believe my camera are Chinese that were changed to English by the dealer. I'm hoping I can upgrade the NVR and not break the cameras. Any information would be great. I think the NVR is Australia but not sure. Here's my set up so far

NVR DS-7108N-SN/P S/N DS-7108N-SN / P0820150821AARR53641XXX9WCVU


Model DS-7108N-SN / P


Serial No. DS-7108N-SN / P0820150821AARR53641XXX9WCVU


Firmware Version V3.0.13 build 150503


Encoding Version V5.0 build 150413


-----------------------------------------------------------------------------------------------------------------


DS-2CD2032-I S/N DS-2CD2032-I20150208CCCH50458XXX1
Upper 4mm
Model DS-2CD2032-I
Serial No. DS-2CD2032-I20150208CCCH50458XXX1
Firmware Version V5.2.0 build 140721
Encoding Version V5.0 build 140714


------------------------------------------------------------------------------------------------------------------
DS-2CD3332-I20141109CCCH48778XXX7
Front Porch 4mm
Model DS-2CD3332-I
Serial No. DS-2CD3332-I20141109CCCH48778XXX7
Firmware Version V5.2.0 build 140721
Encoding Version V5.0 build 140714
-------------------------------------------------------------------------------------------------------------------
DS-2CD3332-I20141105CCCH48828XXX0
Shed 12mm
Model DS-2CD3332-I
Serial No. DS-2CD3332-I20141105CCCH48828XXX0
Firmware Version V5.2.0 build 140721
Encoding Version V5.0 build 140714
 
Worth checking though in my opinion is if the cameras (and the NVR) are showing as English via their currently running firmware:
http://<camera_IP_address>/SDK/language
The camera serial numbers suggest CH region origin so as @Del Boy suggests - they should not be upgraded as a 'language mismatch' error will result with newer NVR firmware.
 
Last edited by a moderator:
alastairstevenson said:
Worth checking though in my opinion is if the cameras (and the NVR) are showing as English via their currently running firmware:
http://<camera_IP_address>/SDK/language
The camera serial numbers suggest CH region origin so as @Del Boy suggests - they should not be upgraded as a 'language mismatch' error will result with newer NVR firmware.
Click to expand...
Ooooo, did not know this. Will remember for future answers.
 
You must log in or register to reply here.
Top Bottom