Hikvision DS-2CD2132F-IS Camera Installation Screws

C

chewie

Getting the hang of it
May 22, 2015
260
34
Hello Gents
I will be installing this camera into a new setup, as you can see on this picture the electrical fixture will have a cover and the camera is going to be mounted on the cover, I have to remove the camera installation screws and use other type of screw with nut to secure it to the cover, are the installation screws that come with the camera hard to remove? or there is a way special way to remove them?
Please let me know.
Thanks in advance.
Regards.
Chewie
 

Attachments

  • IMAG0433.jpg
    IMAG0433.jpg
    610 KB · Views: 179
@chewie, you can use any screws you want...they are not even in the camera they come in a separate bag..
 
Last edited by a moderator:
Hello Fenderman
On my cameras when I remove the dome, inside on the chassis of the camera there is 3 screws to use for attachment to the mounting brackets, those are the screws am referring to.
Thanks for your replay.
Regards.
Chewie
 
You must log in or register to reply here.
Top Bottom