- Dec 5, 2016
- 2,979
- 3,179
Was curious if anyone with experience watching Hikvision do firmware updates had any thoughts on if features in firmware only for newer cameras are likely to ever get incorporated in future updates for older cameras?
@simon247 mentioned that 5.4.4 (for the R6s) has some new parameters for tuning Intrusion Detection (below). I'm pretty interested in this, but all of my cameras are the 3MP R0s, so there is no 5.4.4 for them.
Was curious if there was a chance those features would show up in a future firmware update for the R0s, or if the 3MP R0s are EOL when it comes to getting new stuff like that?
@simon247 mentioned that 5.4.4 (for the R6s) has some new parameters for tuning Intrusion Detection (below). I'm pretty interested in this, but all of my cameras are the 3MP R0s, so there is no 5.4.4 for them.
Was curious if there was a chance those features would show up in a future firmware update for the R0s, or if the 3MP R0s are EOL when it comes to getting new stuff like that?
Firmware 5.4.4 should help with this. You can set a max size area for a "moving object" before it triggers an intrusion alarm. Just make sure your max size area is smaller than the area of the "moving object" when the lights go out/come back on but larger than a moving person. Enabling rules in your config should help you determine the exact size to go for.