I purchased HFW5231E-Z12E and PFA121 from Andy/Empiretec about a year ago, does anyone know if there is an extension mount for HFW5231E-Z12E, I have the camera setup to monitor back of the house and i want to extend or move the camera away few inches from the wall for better coverage. According to Dahua accessory guide PFB121W fits PFA121 but not sure HFW5231E will fit PFB121W, does anyone here has a suggestion or recommendation?
HFW5231E-Z12E and PFA121 Extension mount
- Thread starter Amp Park
- Start date
I got the same HFW cam, mounted on a PFA121 which fits great (see datasheet https://www.dahuasecurity.com/asset...218/DH-IPC-HFW5231E-ZE_Datasheet_20181215.pdf). That PFB121W seems to me like an "arm" on which "HFXXXX" cameras can be mounted (cfr PFB121W | Dahua Technology and choose accessoires). HFW does not have "mounting" option on the bottom like these HFXXXX cams.
Maybe an HFW cam wasn't the best option for that particular location, maybe you have some "budget" to replace it with a dome - those ones have nicer ways to "get away" from the walls:
Good luck!
CC
Maybe an HFW cam wasn't the best option for that particular location, maybe you have some "budget" to replace it with a dome - those ones have nicer ways to "get away" from the walls:
Good luck!
CC
Thank you, yeah I quickly realized that the bullet style cameras are not good for lot of reasons, I bought 4x IPC-HDW5231R-ZE turrets from Andy within last 1 year, they are very flexible.