Hi all,
My house network is covered by an ASUS aimesh setup, with one node out in the outside garage - its nearest indoor node is 3 metres with breezeblock, double glazing and wood in the way.
The link to this node is wifi and is then connected to my cams through a couple of switch boxes.
The node loses connectivity routinely, I suspect the cold weather (?).
I have a pair of kuwfi cpe units to try and improve the situation, replacing the garage node.
The cpe units are paired but don't communicate, ie they didn't 'plug & play'. I have one connected to the switch box, the other to the indoor's mesh node. There is direct line of sight through
window. They are supposed to connect across 3-5km, so a few metres should be doable!
I have a choice of 5 options for connectivity in the web interface, I chose AP mode (I know router and waspi aren't correct - other choices are universal repeater or repeater).
Still they don't connect.
Can anyone shed any light on what might be an issue? I've changed cables around. Should I have chosen repeater? I want a seamless connection within the imesh
If this doesn't work it'll be time to get out the drill! More reliable, I know, with wiring!
My house network is covered by an ASUS aimesh setup, with one node out in the outside garage - its nearest indoor node is 3 metres with breezeblock, double glazing and wood in the way.
The link to this node is wifi and is then connected to my cams through a couple of switch boxes.
The node loses connectivity routinely, I suspect the cold weather (?).
I have a pair of kuwfi cpe units to try and improve the situation, replacing the garage node.
The cpe units are paired but don't communicate, ie they didn't 'plug & play'. I have one connected to the switch box, the other to the indoor's mesh node. There is direct line of sight through
window. They are supposed to connect across 3-5km, so a few metres should be doable!
I have a choice of 5 options for connectivity in the web interface, I chose AP mode (I know router and waspi aren't correct - other choices are universal repeater or repeater).
Still they don't connect.
Can anyone shed any light on what might be an issue? I've changed cables around. Should I have chosen repeater? I want a seamless connection within the imesh
If this doesn't work it'll be time to get out the drill! More reliable, I know, with wiring!