Help using FTP to upload pix to Weather Underground

D

DouginHull

n3wb
Jul 2, 2018
15
1
Hull, MA
Hi, I'm a new user of BI and to this forum. I have going in circles trying to resolve this error "FTP: 530 Login authentication failed" when testing the FTP upload to Weather Underground. I do operate several weather stations, so I am very familiar with WU requirements. I have reviewed previous posts and have not been able to resolve this problem. All help is really appreciated! Thank you.

Doug
 
As you may know, the 2 main reasons for that error is using an incorrect username or password. I must assume you have triple checked both.

Have you recently tried using an FTP client like Filezilla with the same credentials to see if that works OK?

It may help if you would post a screenshot of your FTP config, such as:

BI_FTP.jpg
 
Last edited:
DouginHull said:
Well, looks like I'm making progress.
Click to expand...

Great! Other than checking 'Passive Transfer mode' in your config as suggested in page 2 of the WU FTP Wiki, can you share what you did to help you in "...making progress" ?
 
DouginHull said:
Here you go
Click to expand...
That's the same screenshot you uploaded 10 minutes earlier. I'm not asking for your username or password, just hoping you could share to help someone else. If you were doing something wrong all along and prefer to keep it to yourself, that's OK, too.
I personally have NEVER made any misatkes.....:rolleyes:
 
Here is the latest issue. I have spent the day going around in circles. Hopefully someone has the answer and can point me in the right direction. Thanks in advance for any help.
 

Attachments

  • Screenshot (3).png
    Screenshot (3).png
    1.1 MB · Views: 42
Is that image from when you click on the 'Test' button?

If so, the Wiki says you can only upload an image (like '.JPG'); the FTP 'Test' in Blue Iris uploads a text (.TXT) file named 'ftptest.txt' which is likely why the test fails.

Set up a camera to upload an image file every 10 minutes or so. The camera will employ those FTP settings to do so.
Go to 'camera properties', select the 'Post' tab, click on 'help' lower right for more info.
 
Thank you for that information and that is the image from a test. I did not realize the the test is a .txt file. I have referred to the help info as well as other information on the web. As far as I can tell my information is correct based on screen shots of those who have been successful. I also requested help from WU - nothing yet. Finally, I should note that a jpeg is being generated every 60 seconds but not uploaded.
 
DouginHull said:
Thank you for that information and that is the image from a test. I did not realize the the test is a .txt file. I have referred to the help info as well as other information on the web. As far as I can tell my information is correct based on screen shots of those who have been successful. I also requested help from WU - nothing yet. Finally, I should note that a jpeg is being generated every 60 seconds but not uploaded.
Click to expand...

OK, good info and success is on the horizon, hopefully.
Can you post a screenshot of the 'camera properties', 'Post' tab? BTW, there is no confidential info on it, that would be only on your FTP setup page.
 
Here are a few shots which you may find interesting. You can clearly see the jpegs on the far right of the screen. But not uploading.
 

Attachments

  • Screenshot (4).png
    Screenshot (4).png
    1.1 MB · Views: 36
  • Screenshot (5).png
    Screenshot (5).png
    1 MB · Views: 36
  • Screenshot (6).png
    Screenshot (6).png
    1.1 MB · Views: 32
+1 to @tangent 's query. For test, I'd go to 'Post' tab and check all profile boxes at bottom.

Also: have you tried an FTP program (like free 'Filezilla') to FTP your image to WU using your credentials? If that doesn't work, then you can eliminate BI as being the problem, IMO.
 
Last edited:
  • Like
Reactions: tangent
Have not tried that. I do have FileZilla loaded and have looked at it. You know there's just so much new material an old man can absorb in a couple of days ;-)
 
You must log in or register to reply here.
Top Bottom