Help on Motion Trigger when camera Moves

W

Whitewater

n3wb
Apr 4, 2015
4
0
First time user. Love BI so far!

Question: When my schedule moves my camera to a new profile/location at night and then back again in the morning, it triggers movement and sends messages. (I do understand why that happens) But is there a way to stop that during those profile changes?

Thanks for any info!
 
Is there any way to pause the camera during the move? I don't have a PTZ, So I'm just throwing this out from left field.
 
Whitewater said:
First time user. Love BI so far!

Question: When my schedule moves my camera to a new profile/location at night and then back again in the morning, it triggers movement and sends messages. (I do understand why that happens) But is there a way to stop that during those profile changes?

Thanks for any info!
Click to expand...
Welcome to the forum! From the help file
"The Max travel time/motion delay setting is used to momentarily pause motion detection on the camera while it is being moved in order to prevent triggers. Set this value as low as possible, but greater than the time necessary for the camera to finish movement."

Another option that can be used in general to avoid false alerts is to create a cloned camera in blue iris and only use it for alerts..set the threshold for the alert camera higher than the recording camera, this way you never miss a recording and only get true alerts...you can hide the alert camera so you dont have duplicates on the screen.
 
Excellent. That worked fine. It's tough digging through all the "new" info that's available! But this works just as it should.
Thanks.
 
fenderman said:

Another option that can be used in general to avoid false alerts is to create a cloned camera in blue iris and only use it for alerts..set the threshold for the alert camera higher than the recording camera, this way you never miss a recording and only get true alerts...you can hide the alert camera so you dont have duplicates on the screen.
Click to expand...

How do you create a clone camera ?
 
Caspy said:
How do you create a clone camera ?
Click to expand...
You simply add a new camera to blue iris but use the credentials as the camera you want to clone...now you see two of the same camera..set the cloned camera not to record, but only setup alerts...you can hide the second camera so it doesnt appear on the screen...
camera properties>general
Then right click on the black portion of the screen and make sure show hidden cameras is unchecked...
 
You must log in or register to reply here.
Top Bottom