Help configure iVMS-4200 PCNVR to record on 2432FIW's PIR

[copypaper212]

How do i configure iVMS-4200 PCNVR to record on 2432FIW's PIR? There are 3 options in iVMS-4200 PCNVR - record on motion detection, record on alarm, record on alarm and motion. As i understand i should make PIR send alarm output which iVMS-4200 PCNVR will record on?

Here is what i did:
1. In iVMS-4200 PCNVR in record template i've chose[customize] and draw [alarm] from 0 to 24 on all days.
2. Configured [other alarm] in 2432FIW to the following:
http://easycaptures.com/fs/uploaded/1036/5268580403.png
3. Configured [alarm output] in 2432FIW to the following:
http://easycaptures.com/fs/uploaded/1036/2184758579.png

Still it's not recording. What am i doing wrong?

 

[copypaper212]

bump, any suggestions?

 

[badmannen]

edit: delete

 

[copypaper212]

Found this tutorial: Using IP camera based PIR sensors with Blueiris
Set up cameras the same way.
Now PIR triggers the alarm output when motion is detected by this sensor, how to make iVMS-4200 PCNVR record from this alarm output?

 

[badmannen]

did you try to set "All events" a record settings?

 

[copypaper212]

did you try to set "All events" a record settings?

no, will try - but won't this make it record from also from regular movement detection? (though it is disabled on camera, so should work)
Thank you for suggestion, will try and report back.

 

[badmannen]

Yea I meant more just to check that it works at least and then work your way backwards to the "correct" way

 

[copypaper212]

UPDATE:
badmannen's suggestion worked.
"All events" does record on PIR and when disabling all other alarms/detections on cameras only PIR triggers the recording.
Thank you Italian guy

 

[badmannen]

Good it worked out. I never even used the program for real I'm getting my first 2 cameras tomorrow. So I will be back with some questions, be prepared