See usage levels here:
Blue Iris Update Helper
Thanks for that info. I am guessing that's pulled from the servers as collected data. I guess the intent of this thread was to see if there is a practical limit to BI. I know the licensing goes to 64 but in my experience, vendors will always overstate capabilities. It does appear that 30 is not a high number, so that made me feel better (not my wife though).
I wonder if these are idle CPU readings vs action or alerted readings?
I run a Ryzen 9 5950x, and see general idle CPU stats at about 10-13%. When someone drives by, tripping my 4 front cams in succession i can see a spike of 60% or more. I am running off an m.2 1T SSD so i don't think i am getting write lag. (benchmarks below)
(no I'm not German but I'm running from the zip file so i guess it defaults to German)
I have had times when it spikes to 100% for a maybe 10 sec. I updated a couple weeks a go and that's when it got worse. I tried the old uninstall reinstall (left the dir there and thus kept the configs), but didn't help. I am up to date on code (including the one this morning) but this oddity continues (well did yesterday). I guess my next thought is a clean install with everything removed.
Any thoughts would be appreciated.
Running almost all Amrest 4K's with about 6 2k versions tossed in, set to 15fps, increased buffers to 10Mb. I have spent weeks turning most knobs i can find, can't figure out the spikes. Was thinking it was volume of cams type thing but i guess that's not the issue since i am not pushing any limits. Oh well, the quest continues!
Thanks
Rif