Grainy streams.

[darre937]

I have done something. Who knows what. I keep getting cpu spikes from 3-5% to 100% and all the sudden all my streams are grainy. All cameras are reolink 410's. I have searched every thing I could find. But the same outcome. Any one know what else I can do to fix it? Thanks in advance

 

[wittaj]

That is the least of your problems with Reolinks, but lets go ahead and fix this one.

Make it H264 with no codec (no + or H or anything that says codec on).

Turn off Hardware Acceleration, both globally and in the camera itself.

But do keep in mind most have found Reolinks are not stable with Blue Iris.

 

[darre937]

That is the least of your problems with Reolinks, but lets go ahead and fix this one.

Make it H264 with no codec (no + or H or anything that says codec on).

Turn off Hardware Acceleration, both globally and in the camera itself.

But do keep in mind most have found Reolinks are not stable with Blue Iris.

It was working perfect I just don't know what changed

 

[wittaj]

Your GPU shows a high percentage - are you sure hardware acceleration is not on.

 

[darre937]

H.264 has
1. base
2. main
3. high

 

[darre937]

gpu spikes a lot too

 

[wittaj]

Try just the base.

Also try a reboot of everything.

It could also be a power supply issue going bad or a cable connector starting to corrode.