Frustrated user, please help with settings!

J

jaxdawg

n3wb
Jan 19, 2016
2
0
Hello all, I'm so thankful to have found this forum!
I have BI version 3.09 and a Foscam FI8918W wireless IP camera. My camera (only 1) is inside the house and after much tweaking it only sporadically recorded video. Since its inside, I'd like it to record everything that comes into its field of view. I went through this forum and changed settings based on recommendations that had been posted. Now it won't record at all. I'm very frustrated. Attached are the current settings. Can someone please let me know what settings I specifically need? Again, it's indoors so I want to record everything that comes into its field of view. Please help!
Thanks
Randymotion trigger.JPGrecord tab.JPG
 
jaxdawg said:
Hello all, I'm so thankful to have found this forum!
I have BI version 3.09 and a Foscam FI8918W wireless IP camera. My camera (only 1) is inside the house and after much tweaking it only sporadically recorded video. Since its inside, I'd like it to record everything that comes into its field of view. I went through this forum and changed settings based on recommendations that had been posted. Now it won't record at all. I'm very frustrated. Attached are the current settings. Can someone please let me know what settings I specifically need? Again, it's indoors so I want to record everything that comes into its field of view. Please help!
Thanks
RandyView attachment 7740View attachment 7741
Click to expand...
Welcome to the forum...the first thing you need to do is update to 3.66, 3.09 is four years old. Go to the bottom and see legacy versions. http://blueirissoftware.com/updates/
Did you just purchase this software? if so you were ripped off. Version 4 has been out for over a year. I would HIGHLY recommend upgrading to v4. The upgrade is only 30 dollars for v3 users. If you just purchased the software return it to the seller and buy from the link above.
 
You want to turn off the enable on the trigger tab. You want to check continuously on the video tab.
 
what peacockranch said. motion-detection recording will only trigger for objects that are 'bigger' than the box. since your 'trigger' box almost fills the image frame, it'll only trigger on HUGE (almost impossible) changes in the picture...
 
Ahhh ... thanks all. Obviously, I had the motion detection backwards. Didn't understand it. Yes, I've had the software for a while and will be upgrading to 4 shortly.
Much appreciated. I'll report back after the changes and updates.
 
You must log in or register to reply here.
Top Bottom