Failed Local Web Login to Dahua cameras through NVR

L

Longview

n3wb
Nov 27, 2020
23
11
Texas
I have four cameras (Dahua) attached to a Dahua NVR. After a factory reset and import of existing configuration the cameras are not accessible from the NRV any longer?

The firmware is Ver 4, the NVR 16 Channel with POE. I used IE11 to log into them the previously with no issues. The NVR is on a 192.168.0.XXX network and the switch has the 10.1.1.1 translate to the cameras. When I select the IE icon to locally log into the cameras I get the attached error.

It seems like it is a network or certificate of authority error but looking for some direction, see attached screenshots. Thanks guys...Cam View.jpg
Error.jpg
NVR Switch.jpg
 
Could be the Google/Chrome port thing but I see that mostly with IE and I havent done anything to IE for the port problem
 
LOTS of threads on this, seems it's been an issue for some time now....

A

Thread 'No Access to one CAM Web GUI behind NVR'

Hi All,

I know this scenario has cropped up many times but this situation is a little odd and hope someone knows what's happened here.

I have a 5432-16P NVR and have 20 cameras connected to the NVR with 16 via the PoE ports on the NVR. All of the cameras have installed fine and are all accessible vis the registration page and clicking on the blue IE icon.......... except one! I added a new camera today to port 4 on the NVR. The camera was recognised no problem and displayed perfectly. However when I click the IE icon to access the web GUI, I get a blank page and the "This site can't...
 
  • Like
Reactions: bigredfish
I find that, for me, anything on the "private" protocol seems to work better with Pale Moon. Those on Onvif, seem to prefer Edge in IE mode. Just my experience
 
You must log in or register to reply here.
Top Bottom