EZViz uart socket

[woynitt]

Hi,

I want to connect via UART to EZViz C4W camera, but connector is quite different than in Hikvision camera.

Does anyone know what type of connector it is?

 

[alastairstevenson]

Does anyone know what type of connector it is?

JP2?
Looks like the usual 4-pin JST ZH connector that (almost) all Hikvision devices have.

 

[alastairstevenson]

Example pinout :

Hikvision NVR DS-7804N-E1/4P Bricked

Hello, i have NVR DS-7804N-E1/4P bricked when i flash wrong firmware DS-7604NI for it. So now it only boot to Logo then bip bip and auto restart. I tried flash TFTP very many time by set IP of my PC to 192.0.0.128 / subnet 255.255.255.0 and turn firewall is off. But no thing flashable although i...

ipcamtalk.com

 

[ezvizfmw]

Hi,

I want to connect via UART to EZViz C4W camera, but connector is quite different than in Hikvision camera.

Does anyone know what type of connector it is?

View attachment 106573View attachment 106574

It looks like it's the same connector as on the EZViz CP4 (/DP2C) - a JST SUR connector (04SUR-32S/04SUR-36L).
There are also pre-made cables available: 04SUR-04SUR-32W150. JST SUH may fit as well.

 

[woynitt]

It looks like it's the same connector as on the EZViz CP4 (/DP2C) - a JST SUR connector (04SUR-32S/04SUR-36L).
There are also pre-made cables available: 04SUR-04SUR-32W150. JST SUH may fit as well.

Thank You for this information.

It will be easier to connect.