Ezviz doorbell cam resolution problem

andycots

Getting the hang of it
Joined
Feb 21, 2015
Messages
151
Reaction score
73
Location
West Yorkshire, UK
Hi, not sure why but the Ezviz camera keeps doing this, is ok on reboot and fine in the Ezviz app also fine in VLC, just BI, will be good for around 12 hrs after reboot of camera then starts doing below, if I open the Ezviz app then the picture comes good but as soon as I close it, goes funny again. I have turned HA of because I believe that was causing the artefacts in one of the pics.
 

Attachments

Joined
Dec 7, 2020
Messages
1
Reaction score
0
Location
UK
Same problem here. I've replaced the bell transformer to a stronger one already (24v), but that didn't help. Ezviz support is useless trying to tell me that signal from that video doorbell is no supported by any NVR (I tried to use Shinobi).
 
Top