I am in the process of registering my cameras onto EZVIZ to that I can access them remotely without having to go via the NVR (since I am having stability issues with this on the DNS - see thread)
I have successfully added two cameras but the third is not showing up! EZVIZ is showing error "Device is not connected to the service, please check the network".
I am using the "add by serial No." option and using the last nine digits of the serial number straight from the config page of the respective camera accessed via the same LAN. this is the same process as I used for the other two cameras. I also have Enable Telnet & Enable SSH ticked.
Any thoughts as this is perplexing me. The camera in question is accessible with the same network by the NVR and ip address
Many thanks in advance
I have successfully added two cameras but the third is not showing up! EZVIZ is showing error "Device is not connected to the service, please check the network".
I am using the "add by serial No." option and using the last nine digits of the serial number straight from the config page of the respective camera accessed via the same LAN. this is the same process as I used for the other two cameras. I also have Enable Telnet & Enable SSH ticked.
Any thoughts as this is perplexing me. The camera in question is accessible with the same network by the NVR and ip address
Many thanks in advance