Hi,
I'm struggling to setup my new PC (Running on Win 11) for Blue Iris. I've decided to setup a Dual NIC solution but seem to have some of my settings wrong. Once I connect the NIC1 (which connects to my main router), it only takes about 30 minutes and my entire network goes down. If I disconnect the computer and restart the router, everything comes back like normal which tells me it is my setup.
Here is my topography, would appreciate any and all advice!
-Modem connects directly to my router setup- 192.168.7.XX
-POE switch is local and is only connected to my BI computer: 10.11.12.XX
On my BI computer:
NIC 1: 192.168.7.253 (I setup a reservation through my router to make this Static IP- on the computer it's also set to manually be this IP), Subnet 255.255.255.0, Gateway 192.168.7.1
NIC 2: 10.11.12.2, Subnet 255.255.255.0, Gateway 10.11.12.1
Tried to leave my DNS blank but it auto reverts to Auto/DHCP so hopefully that's ok...
I'm struggling to setup my new PC (Running on Win 11) for Blue Iris. I've decided to setup a Dual NIC solution but seem to have some of my settings wrong. Once I connect the NIC1 (which connects to my main router), it only takes about 30 minutes and my entire network goes down. If I disconnect the computer and restart the router, everything comes back like normal which tells me it is my setup.
Here is my topography, would appreciate any and all advice!
-Modem connects directly to my router setup- 192.168.7.XX
-POE switch is local and is only connected to my BI computer: 10.11.12.XX
On my BI computer:
NIC 1: 192.168.7.253 (I setup a reservation through my router to make this Static IP- on the computer it's also set to manually be this IP), Subnet 255.255.255.0, Gateway 192.168.7.1
NIC 2: 10.11.12.2, Subnet 255.255.255.0, Gateway 10.11.12.1
Tried to leave my DNS blank but it auto reverts to Auto/DHCP so hopefully that's ok...
Last edited: