Hello, please tell me, the DS-H208Q DVR is not working, the supply voltage on the system board is normal, I assume that the bootloader has crashed. When issuing the command via UART:
setenv bootcmd 'tftp 192.168.1.4 digicap.dav; update 192.168.1.108; boot 192.168.1.108' a message appears:
timeout for link [5000]!
ETH0: PHY(phyaddr=1, mii) not link!
higmac init fail!
bootm — boot application image from memory
As I understand it, DVR does not see the TFTP server. The firewall on the computer where I raise the server is turned off. What am I doing wrong?
setenv bootcmd 'tftp 192.168.1.4 digicap.dav; update 192.168.1.108; boot 192.168.1.108' a message appears:
timeout for link [5000]!
ETH0: PHY(phyaddr=1, mii) not link!
higmac init fail!
bootm — boot application image from memory
As I understand it, DVR does not see the TFTP server. The firewall on the computer where I raise the server is turned off. What am I doing wrong?