DS-2CD2532F-IS how to record audio?

M

Musad

n3wb
May 22, 2014
20
3
I have an DS-2CD2532F-IS and was wondering how to record the audio to the NVR during Motion detection?

Thanks for any help.
m
 
It should be recording it automatically with the built in mic. I can hear audio in my recordings on the NVR from the DS-2CD2532F-IS. You might want to adjust the audio sensitivity.

Unless you are referring to an externally connected mic?
 
I am referring to the built in mic. When I log into the ipc the volume is always muted in live view.
I guess I need to do some testing.
thestooge said:
It should be recording it automatically with the built in mic. I can hear audio in my recordings on the NVR from the DS-2CD2532F-IS. You might want to adjust the audio sensitivity.

Unless you are referring to an externally connected mic?
Click to expand...
 
Dumb question - can you click the icon in Live View to toggle the on / off status?

And also:
Before using the two-way audio function or recording with audio, please set the
[FONT=Calibri,Bold][FONT=Calibri,Bold]Stream Type[/FONT][/FONT]
to
[FONT=Calibri,Bold][FONT=Calibri,Bold]Video & Audio [/FONT][/FONT][FONT=Calibri,Bold][FONT=Calibri,Bold][/FONT][/FONT]referring to [FONT=Calibri,Italic][FONT=Calibri,Italic]Section 5.4.[/FONT][/FONT]
Click to expand...
[FONT=Calibri,Italic][FONT=Calibri,Italic][/FONT][/FONT][FONT=Calibri,Italic][FONT=Calibri,Italic][/FONT][/FONT]
 
Last edited by a moderator:
You must log in or register to reply here.
Top Bottom