- Apr 29, 2018
- 10
- 8
First Post so, hi to you all!
I'm probably been overthinking this and driving myself mad in the process so I thought i'd ask before I end up shorting out all my equipment!
Got a Dahua IPC-HDW4231EM-AS on its way from EmpiretecAndy (thanks Andy!). As the garage I am mounting the camera is just outside of the range of my home wifi and with no possibilty of installing an ethernet cable to the garage, I need to install an outdoor antenna on to the garage to receive the wifi signal from my home and would like to use the PoE in the Access Point to power th Dahua camera, i'm looking at getting this CPE510 | 5GHz 300Mbps 13dBi Outdoor CPE | TP-Link United Kingdom - its similar in spec to the Ubiquiti NSM5 (and also similarly not entirely clear on 803.af conformity). Here's where I started to go mad.........!
Am I right in thinking that using the Passive PoE Pasthrough from the secondary Lan on the CPE510 will allow me to not only power the Dahua but also allow video to be trasmitted to the CPE and thus back to my home?
I ask because having read so much about PoE and this or that Access Point, I've confused myself and no longer trust my thinking, having poured over the NSM5 and the CPE, I'm doubting myself and the cloudiness of 803.af!
Should I be looking at something else perhaps?
Thank you gentleman, any and all help appreciated!
I'm probably been overthinking this and driving myself mad in the process so I thought i'd ask before I end up shorting out all my equipment!
Got a Dahua IPC-HDW4231EM-AS on its way from EmpiretecAndy (thanks Andy!). As the garage I am mounting the camera is just outside of the range of my home wifi and with no possibilty of installing an ethernet cable to the garage, I need to install an outdoor antenna on to the garage to receive the wifi signal from my home and would like to use the PoE in the Access Point to power th Dahua camera, i'm looking at getting this CPE510 | 5GHz 300Mbps 13dBi Outdoor CPE | TP-Link United Kingdom - its similar in spec to the Ubiquiti NSM5 (and also similarly not entirely clear on 803.af conformity). Here's where I started to go mad.........!
Am I right in thinking that using the Passive PoE Pasthrough from the secondary Lan on the CPE510 will allow me to not only power the Dahua but also allow video to be trasmitted to the CPE and thus back to my home?
I ask because having read so much about PoE and this or that Access Point, I've confused myself and no longer trust my thinking, having poured over the NSM5 and the CPE, I'm doubting myself and the cloudiness of 803.af!
Should I be looking at something else perhaps?
Thank you gentleman, any and all help appreciated!