Dahua VTO 2211G-WP

A

antonis77

n3wb
Mar 11, 2022
3
0
Greece
Hi,

I ve the ip villa door station VTO2211G-WP.
I am using it on an Asterisk system and i am able to register it as an extension syccesfully in my FreePBX.

When i am using the #VTO password# to unlock the door, it is rebooting !!!

anuy idea ?
 
antonis77 said:
Hi,

I ve the ip villa door station VTO2211G-WP.
I am using it on an Asterisk system and i am able to register it as an extension syccesfully in my FreePBX.

When i am using the #VTO password# to unlock the door, it is rebooting !!!

anuy idea ?
Click to expand...
I have the same VTO and am running it on a test bench right now with freePBX. I do not use the door opening function.

However, I am using custom ringbacks to the VTO that can automatically change the ringback to a default or a holiday, event, etc.. I was inspired by this post on reddit that does not have the automatically changing ringbacks, but it does have a macro that can be setup in freePBX using config edit to open the door using DTMF codes.

Hope that helps.

 
Ive noticed if i upload a custom tone for opening the door or something else, when i am using a dtmf code to open the door it is rebooting.
If i keep the default its ok!!!
 
antonis77 said:
Ive noticed if i upload a custom tone for opening the door or something else, when i am using a dtmf code to open the door it is rebooting.
If i keep the default its ok!!!
Click to expand...

That is interesting. I have all sounds disabled in the VTO except for ringback sounds. I thought I had read the custom upload sounds need to meet specific formatting requirements. Did you make sure they are not too big or otherwise meet the parameters?
 
You must log in or register to reply here.
Top Bottom