Neither of the firmware versions match "DH-SD49225XA-HNR". How does one know which firmware is for which device?
Also, do you have any recommended firmware websites?
Dahua SD49225XA-HNR Auto Tracking Enabled Firmware.
- Thread starter ljw2k
- Start date
Neither of the firmware versions match "DH-SD49225XA-HNR". How does one know which firmware is for which device?
Also, do you have any recommended firmware websites?
Not all SD49225XA-HNR or SD49425XB-HNR can use this fw, have to be the original S1 version. So double check this before you upgrade the fw
.
.
No it will not work, don't make any try or else brick your PTZ. Only for the SD49225XA-HNR or SD49225XB-HNR.
I know that this post is actually about the auto-tracking firmware, but I'm asking here anyway. 
I just saw that there is a new firmware for the SD49225XA-HNR from July 2024 (DH_SD-Prometheus_MultiLang_PN_Stream3_V2.812.0000047.2.R.240723). Has anyone by any chance tested it? The release notes do not contain any information about any changes and/or bugs that may have been fixed.
I myself am still using the firmware version V2.812.0000032.2.R, build date: 2022-08-04 with the camera and I am surprised that there is now a new firmware version for the EOL camera. Actually, this only happens with Dahua EOL products if it closes a (serious) security gap.
I just saw that there is a new firmware for the SD49225XA-HNR from July 2024 (DH_SD-Prometheus_MultiLang_PN_Stream3_V2.812.0000047.2.R.240723). Has anyone by any chance tested it? The release notes do not contain any information about any changes and/or bugs that may have been fixed.
I myself am still using the firmware version V2.812.0000032.2.R, build date: 2022-08-04 with the camera and I am surprised that there is now a new firmware version for the EOL camera. Actually, this only happens with Dahua EOL products if it closes a (serious) security gap.
Is no chance to find a firmware for SD49225XA-HNR-S2 to work auto traking?
Now i have: 2.812.0000007.1.R, Build Date: 2021-07-13
PTZ Version 2.401.0000000.64.RHNZ 200219 34642
Now i have: 2.812.0000007.1.R, Build Date: 2021-07-13
PTZ Version 2.401.0000000.64.RHNZ 200219 34642
The S2 was not built or sold with auto tracking and the S1 firmware will not work.
The autotracking is a function with the fw, software will not make it working.
This PTZ around 8 years old, time to buy a real autotracking version bro.
This PTZ around 8 years old, time to buy a real autotracking version bro.
It was purchased recently. I was misled by the camera's name, SD49225XA, thinking that the S2 version comes with auto tracking... then I believed that by changing the firmware I would get auto tracking. 