Dahua PTZ SD60230U-HNI not working

J

Javier

n3wb
Feb 1, 2017
14
3
Hello,

I recently got a new Dahua SD60230U-HNI PTZ and the PTZ function is not working. Video feed is ok.

PTZ is enabled for the camera. I have tried using the Onvif and the 3 dahua options for PTZ control without any luck.

Any ideas on what to do?

Thanks
 
I've already emailed the developer about the issue. I suggest you also send him an email (the more info the better).

In the meantime you can try this. In the camera web interface disable ONVIF authentication. In BI right click on the camera and click "Camera Properties", click on the "video" tab, click on "configure", click on "Find/inspect". Once that's done you'll see the field "path" under "video" populate with something that looks like this "/cam/realmonitor?channel=1&subtype=0&unicast=true" Make sure you delete anything after "=true". Once this is done click Ok and you should have very limited PTZ functionality. If I were you, I wouldn't use anything other than the PTZ presets in BI until the bug is fixed. I've found attempting to use the PTZ arrows causes the camera to lock up and/or disconnect from blue iris.
 
  • Like
Reactions: fenderman
smiticans said:
I've already emailed the developer about the issue. I suggest you also send him an email (the more info the better).

In the meantime you can try this. In the camera web interface disable ONVIF authentication. In BI right click on the camera and click "Camera Properties", click on the "video" tab, click on "configure", click on "Find/inspect". Once that's done you'll see the field "path" under "video" populate with something that looks like this "/cam/realmonitor?channel=1&subtype=0&unicast=true" Make sure you delete anything after "=true". Once this is done click Ok and you should have very limited PTZ functionality. If I were you, I wouldn't use anything other than the PTZ presets in BI until the bug is fixed. I've found attempting to use the PTZ arrows causes the camera to lock up and/or disconnect from blue iris.
Click to expand...

Which model do you have? How long have you been waiting for a fix to the issue?
 
Same issue with my SD59230-HNI Bummer..
 
I just got the same email, thanks for the heads up! Time to turn off pesky port forwarding.
 
Last edited:
smiticans said:
@wantafastz28 @Javier @fenderman

Just got an email from Ken. He said version 4.5.0.3 should fix the issue. Make sure under the PTZ tab its set to "Dahua Other"

Just tested it on mine and so far its working properly.
Click to expand...


Did the update just now, and tried it... no dice... Will try a couple different settings. or maybe re-add the camera.

Edit: did an inspect, works fine now.
 
What I am finding on BI 4.5.1.4 that using the Find/inspect and making sure your PTZ tab is set for Onvif (OXML) all the arrows work fine as well as the presets. BUT, my PTZ home button (left of arrows in BI) just goes to some zoomed in point ?? I can't seem to find a way to set this preset to be home ? Also I have no mouse curser PTZ control as I have had in past on other cams. This is on a SD49225T-HN.
I have gave Ken access and maybe he can shed some light on this.

UPDATE: This issue has been fixed with 4.5.1.6
 
Last edited:
I have a purchased a Dahua IPC-HFW5830-E and tried PTZ but doesn't works at all. Using the ONVIF profile for PTZ, have tried all the Dahau and none seem to work.
Please can anyone help.


Thanks,
Jeet
 
You must log in or register to reply here.
Top Bottom