Dahua NVR gui have access to zoom for applicable cameras?

[rufunky]

Does Dahua NVR gui (NVR 4.0) have access to zoom for applicable cameras?

I'm trying to avoid having to plug a laptop in to one of the POE ports just to adjust the zoom on a couple of cameras. I swear this feature was present a couple years ago...

EDIT: This NVR is not on a network currently

 

[wittaj]

The best way is to get into the camera GUI. To get into the camera GUI, you need to first access the NVR GUI by going to a computer and opening up a browser (preferably Internet Explorer but Pale Moon will work as well) and type in the IP address of the NVR and login that way. Next go into the camera settings page on the NVR and look for the Microsoft e Web Browser and select it and it will go to the camera GUI (photo credit bigredfish from his PSA thread). Your screen may look a little different to get into the camera gui and see if doing it this way gets you access to some other features the NVR is blocking - do not worry about the Port number and circle as that was from another issue someone posted.

Simply select the blue IE icon and it will go to the camera GUI and from there you can set the camera parameters.

 

[rufunky]

The best way is to get into the camera GUI. To get into the camera GUI, you need to first access the NVR GUI by going to a computer and opening up a browser (preferably Internet Explorer but Pale Moon will work as well) and type in the IP address of the NVR and login that way. Next go into the camera settings page on the NVR and look for the Microsoft e Web Browser and select it and it will go to the camera GUI (photo credit bigredfish from his PSA thread). Your screen may look a little different to get into the camera gui and see if doing it this way gets you access to some other features the NVR is blocking - do not worry about the Port number and circle as that was from another issue someone posted.

Simply select the blue IE icon and it will go to the camera GUI and from there you can set the camera parameters.

Thank you wittaj
I should have mentioned this NVR is not on a network currently. I will update my original post to reflect this.

 

[MC1987]

On local monitor. Go full screen on channel in question, right click and select PTZ control. Use zoom + and - buttons, camera should auto focus

 

[rufunky]

Thanks so much MC1987!