Dahua HFW1239

[manjulabw]

Hi everyone!

I have 7 cam dahua system. Few days back i changed one of camera color format settings through OSD menu and what happened its restart with bit bigger screen and sound and the OSD menu was disappeared. I tried restart few times DVR but no luck. Should I have to hard reset? or any solution to get it back to original default settings ? Thanks guys.

 

[TonyR]

Yes, I recommend a "hard reset" but if not able, try this => [HAC] How to Set Default on HDCVI Camera

Download and follow the PDF instructions

 

[manjulabw]

Yes, I recommend a "hard reset" but if not able, try this => [HAC] How to Set Default on HDCVI Camera

Download and follow the PDF instructions

Thanks. but I have no access to the OSD whether its dvr or dmss.

 

[TonyR]

What monitor is connected to DVR? HDMI or VGA?

 

[manjulabw]

What monitor is connected to DVR? HDMI or VGA?

vga but most of the time cctv monitor through phone and pc

 

[TonyR]

vga but most of the time cctv monitor through phone and pc

The camera's resolution may now beyond what the VGA can display.
Does the DVR have a HDMI port for a HDMI monitor?

 

[manjulabw]

The camera's resolution may now beyond what the VGA can display.
Does the DVR have a HDMI port for a HDMI monitor?

yes it has HDMI. but my concern is OSD menu doesn't respond or open even i connect HDMI right?

 

[TonyR]

yes it has HDMI. but my concern is OSD menu doesn't respond or open even i connect HDMI right?

It's hard to say....you have nothing to lose by trying though....right?

 

[tangent]

You should also try power cycling the camera.

 

[manjulabw]

It's hard to say....you have nothing to lose by trying though....right?

Thanks