Where is the list of firmware for the dahua cameras. I cant find it,i think was under Andy? Any link to the list would be great.
Thanks
Thanks
Dahua Firmware
- Thread starter oknoob
- Start date
The firmwares are under the Andy subforum...
But, a common theme around here is don't fix what ain't broke. If the camera is working and meets your needs, in many instances an update breaks what you had working and provides you with something you didn't need. A Z12E that someone updated and then constantly reboots comes to mind, and a certain PTZ that loses autotracking with an update come to mind, a Hikvision ANPR camera losing half the FPS and ability to read US plates - those are big deals to have happen. Don't do it unless it is fixing a problem you are experiencing or adds a feature you really need.
All of these mentioned users had perfectly working cameras for their need until they updated just for the sake of updating...
But, a common theme around here is don't fix what ain't broke. If the camera is working and meets your needs, in many instances an update breaks what you had working and provides you with something you didn't need. A Z12E that someone updated and then constantly reboots comes to mind, and a certain PTZ that loses autotracking with an update come to mind, a Hikvision ANPR camera losing half the FPS and ability to read US plates - those are big deals to have happen. Don't do it unless it is fixing a problem you are experiencing or adds a feature you really need.
All of these mentioned users had perfectly working cameras for their need until they updated just for the sake of updating...
1st post this thread.
ipcamtalk.com
IPC-T5442T-ZE IPC-T5442TM-AS latest new firmware IPC-HX5XXX-Volt_MultiLang_PN_Stream3_V2.800.0000000.20.R.200903
Hey guys This firmware has been released , there has 2 new fw, after flash, make a default(Not Factory default) 1. New baseline with latest new FW. Still under testing Beta version. Feature Description 1 Updated the version of onvif to V19.12 2 H.256 codec is enabled for main stream...
Nope. There is an update with SMD 3.0 but folks have found that to not be working as intended yet.
Like I mentioned, no need to update unless you are experiencing a problem that an update is known to fix.
So if you are having an issue, what is the issue and lets see if anyone here experienced it and has a solution.
Like I mentioned, no need to update unless you are experiencing a problem that an update is known to fix.
So if you are having an issue, what is the issue and lets see if anyone here experienced it and has a solution.
SouthernYankee
IPCT Contributor
what is broken in the camera that you are trying to fix ? If you can not answer that question DO NOT UPGRAGE !!!!
A camera is not a PC. you may turn it into a brick.
If it is not broken do not fix it.
A camera is not a PC. you may turn it into a brick.
If it is not broken do not fix it.
I will check i have 3 5442, 1 is varifocal,1 is 3.8 mm, and 1 fix 2.8 and want check my firmware. I want have the same in all the cameras.
IAmATeaf
Known around here
This is the version I have installed on my 5442-ase cams, has a fix for SmartIR
IPC-T5442T-ZE IPC-T5442TM-AS latest new firmware General_IPC-HX5XXX-Volt_MultiLang_NP_Stream3_V2.800.15OG004.0.R.201203
ipcamtalk.com
IPC-T5442T-ZE IPC-T5442TM-AS latest new firmware General_IPC-HX5XXX-Volt_MultiLang_NP_Stream3_V2.800.15OG004.0.R.201203
IPC-T5442T-ZE IPC-T5442TM-AS latest new firmware General_IPC-HX5XXX-Volt_MultiLang_NP_Stream3_V2.800.15OG004.0.R.201203
Hey guys The Smart IR firmware has been released. The update is mainly because of the new lot has a small hardware change, so this firmware can work for both the latest new cameras and old batches. IPC-T5442T-ZE IPC-T5442TM-AS IPC-T5241TM-AS IPC-B5442E-ZE IPC-B5442E-Z4E IPC-T5241H-AS-PV...
IAmATeaf
Known around here