Dahua DH-SD49225T-HN correct POE+ injector

S

Spacekiek

n3wb
Aug 27, 2016
15
0
BELGIUM
Hello,

I'm a proud owner of a Dahua DH-SD49225T-HN :cool:
To power it, I'd like to use a POE injector I have laying around from Ubiquiti which delivers 48 volts (24Watt/max 0.75A ) (Model GP-H480-050G)

Do you think this is OK ? (max watt drainage from the cam is 20 Watt , so pretty close to the max of the adapter)

I hate to destroy this new cam with an incorrect power load ...
 
should be fine if both ends support the same PoE standards. It'd be the injector that blows (or shuts down) not the camera if the power draw becomes too much :-)
 
Spacekiek said:
Hello,

I'm a proud owner of a Dahua DH-SD49225T-HN :cool:
To power it, I'd like to use a POE injector I have laying around from Ubiquiti which delivers 48 volts (24Watt/max 0.75A ) (Model GP-H480-050G)

Do you think this is OK ? (max watt drainage from the cam is 20 Watt , so pretty close to the max of the adapter)

I hate to destroy this new cam with an incorrect power load ...
Click to expand...

Ubiquiti also uses passive PoE, so just make sure what your injector is using. I found it hard to tell the difference when researching for the PoE switch suggestion list thread.


Sent from my iPhone using Tapatalk Pro
 
You must log in or register to reply here.
Top Bottom