walkjp1
Getting the hang of it
One of my version 2 boobie cams has started flashing the IR lights on and off all night. Tried rebooting but no luck. Any ideas on how to fix this?
Thanks
Thanks
Dahua Boobie cam thinks it`s disco night!
- Thread starter walkjp1
- Start date
Toggle setting of "Smart IR" ?
walkjp1
Getting the hang of it
Thank you, will try it.
walkjp1
Getting the hang of it
It has been fine for almost a year now. Not sure what good be affecting the settings. Will try.
If no recent environmental changes (wall painted, new light fixture, another cam facing it, etc.) and if no changes to the settings I mentioned above help, consider a hard reset of the cam.
SpacemanSpiff
Known around here
Any chance you've already cleaned all the cobwebs and debris that has collected on and around the camera?
walkjp1
Getting the hang of it
Thank you
walkjp1
Getting the hang of it
It is indoors, in a clean area.
walkjp1
Getting the hang of it
Changing the settings seemed to work. Since I don`t go to the location of the camera often. I just changed both the sensitivity, and turned off Smart IR. Not sure which one did the trick. Andy also mentioned it might be a cable issue. Will keep an eye on it.
Thanks for all the help.
Thanks for all the help.
Mark_M
Getting comfortable
So not an actual disco boobie cam?? 
I found Hi Sharp online... seems they are the OEM for some TVT cameras.
I found Hi Sharp online... seems they are the OEM for some TVT cameras.
walkjp1
Getting the hang of it
May have to get 1!So not an actual disco boobie cam??
I found Hi Sharp online... seems they are the OEM for some TVT cameras.
View attachment 169886