Dahua 8ch poe nvr duplicates all cameras

J

Juisseli

n3wb
Jun 7, 2016
4
0
Odd problem, as seen on picture attached, all 4 cameras (NVR4108-P + HDBW4200E) are connected to nvr's own PoE and all of them are duplicated, as first aid, i have changed the remote channel to 11 to confuse the nvr.. has anyone else had this kind of a problem?
kam.png
 
I would suspect you added them twice. You can add any camera as many times as you want. just click the red X and remove them.
 
I done something similar before, tech supports advice was to default the nvr and disconnect all cams, and add them in 1 at a time.
 
Did you purchase your cameras from the same place you purchased your NVR? I have a few systems out there that do this. The common link is for some reason the Dahua Cams I bought were from another Dahua rebrander. Ok what the heck I will name names here. I have a local guy I have dealt with, he sold me a Optiview NVR a few years back. I purchased a few cams from another Dahua rebrander (Nellys) and everything works great. Just have the ghost cams like you do and cannot make it go away. I suspect its a firmware issue but I have just lived with it because the end user cannot see or be bothered by this. I cannot let it drive me nuts and not had a lot of time to look into it either. If anyone out there can explain this I would be all ears.
 
c hris527 said:
Did you purchase your cameras from the same place you purchased your NVR? I have a few systems out there that do this. The common link is for some reason the Dahua Cams I bought were from another Dahua rebrander. Ok what the heck I will name names here. I have a local guy I have dealt with, he sold me a Optiview NVR a few years back. I purchased a few cams from another Dahua rebrander (Nellys) and everything works great. Just have the ghost cams like you do and cannot make it go away. I suspect its a firmware issue but I have just lived with it because the end user cannot see or be bothered by this. I cannot let it drive me nuts and not had a lot of time to look into it either. If anyone out there can explain this I would be all ears.
Click to expand...

I did purchase them from same place, so no help on that. I think i'll update firmware next..
 
You must log in or register to reply here.
Top Bottom