Customize Display On Dahua Nvr?
- Thread starter walkjp1
- Start date
If you find the NVR you want/have, look at the specs and it shows the different display options it has. See attached picture, the highlighted.
Attachments
Thank you. I am going to order a new NVR soon. Do any of them have the capabilities I am looking for?
looney2ns
IPCT Contributor
You can look at the spec sheets for Dahua NVRs that interest you and determine if they meet your needs.
Dahua Technology - Leading Video Surveillance Solution Provider with CCTV Produc
If you want to limit the Dahua NVR's screen to only five cameras then you can create a custom "Split-5" layout. However, two cameras will share a quadrant, so their width will be compressed. See screenshot.
- Thomas
- Thomas
There is the option to set to Original Ratio under DISPLAY settings. You will end up with black bars above and below the small windows but the aspect ratio will be correct
Thank you, Not what I want to do. I still use Blue Iris for my 5 main cameras that I want to display. Just wish I could also do this with Nvr. Maybe the higher end Nvr`s are capable of this? But I am afraid I will get lost in all the other features.
I guess it depends on the aspect ratio of the cameras and your monitor. When I was looking at it they were all on main stream at 2688x1520 and the NVR is set to 3840x2160 on a 4K tv. If I change them to sub stream there’s bars on the side of the 3 large windows and less black bar on top and bottom of the two small windows. This is a higher end NVR that appears to be capable of displaying 9 4mp cameras on main stream. Displaying 16 and above switches to sub stream