cpu 50%

[nebbiadigiorno]

hi to all.
i am currently running bi with 8 2 mpx ip cam at 25 fps. i changed my cpu (an old amd 8350) with a i5 7600k and 8 gb of ddr4 2400 ram.
i run bi as a service and the record is direct to disk. bi cpu cunsumption is about 50 % . is it possible to decrease this valor? I know that i can low the fps of the cam but there is other option? I have the intel hd acceleration enable and i install the drivers suggested on the forum (hd iris 650).
thanks

 

[nebbiadigiorno]

i decrease the fps to all of 8 cameras to 15 fps but the cpu is not going down. sometimes it goes from 50 to 60 %.

 

[Q™]

Decrease your frame rate to 5fps, reboot and let us know what happens to your CPU usage.

 

[fenderman]

you have something set wrong...read the wiki on proper BI setup..direct to disk, hardware acceleration...are you logging in remotely?

 

[nebbiadigiorno]

i do a clean install and i read the wiki, for the direct to disk and hardware acceleration. i reboot and now with all 8 cameras at 15 fps the cpu is at 40 %. do i have to try the 5 fps option ?

 

[nebbiadigiorno]

i set all the cameras to 5 fps and now the cpu (i conseider only bi) is at 18-20%.

 

[fenderman]

i set all the cameras to 5 fps and now the cpu (i conseider only bi) is at 18-20%.

are you logging in remotely? or viewing on a local monitor?

 

[nebbiadigiorno]

remotely with ui2 web page.
i use 3 remote monitor. 1 my pc, and 2 amazon fire tablet using the ui2 web page.

 

[fenderman]

remotely with ui2 web page.
i use 3 remote monitor. 1 my pc, and 2 amazon fire tablet using the ui2 web page.

no, are you viewing the blue iris pc, using remote desktop or teamviewer?

 

[nebbiadigiorno]

teamviewr

 

[fenderman]

teamviewr

that is causing your high cpu...
cancel the teamviewer session...then check cpu use using the mobile app or ui2...

 

[nebbiadigiorno]

i ll try

 

[nebbiadigiorno]

ok so ui2 says 34% with all of the ip cams set to 15 fps

 

[fenderman]

ok so ui2 says 34% with all of the ip cams set to 15 fps

is the blue iris interface open on the server computer or minimized/service..

 

[nebbiadigiorno]

bi is running as a service

 

[fenderman]

bi is running as a service

yes, but is the interface open or closed?

 

[nebbiadigiorno]

closed

 

[fenderman]

closed

disable all remote sessions and test cpu again..

 

[nebbiadigiorno]

sorry for asking but what you mean by disable all of the remote session? the monitor with the ui2?

 

[fenderman]

sorry for asking but what you mean by disable all of the remote session? the monitor with the ui2?

yes, do you have a monitor attached to the pc?