Connecting dlink cameras

V

Vparagone

n3wb
Sep 26, 2015
4
0
Huntsville, Al
I am new to this software. I have tried multiple types of dlink cameras and based on the dialogue box it appears that the software is communicating, but after the initial handshake it time out requesting the date and time.
Anybody aware of what setting needs to be made to get the cameras to work properly with the software?
 
Vparagone said:
I am new to this software. I have tried multiple types of dlink cameras and based on the dialogue box it appears that the software is communicating, but after the initial handshake it time out requesting the date and time.
Anybody aware of what setting needs to be made to get the cameras to work properly with the software?
Click to expand...
Welcome to the forum..what dlink cameras do you have?
What version of blue iris are you running?
 
Vparagone said:
930, 2310, 2210, 6010, 942, 932 and several others
Latest version of Blu iris, just bought and downloaded yesterday.
Click to expand...
Are you selecting the proper camera from the dropdown menu? Are you entering the proper credentials, port, ip, username, password?
What do you mean by "after the initial handshake it time out requesting the date and time."
 
It does log into the device and then I get a message indicating that it is attempting to get the date and time. The program delays a few seconds and then displays a time out message, proceeds with some messages about fiscal cameras and then stops.
If I go to the display screen, it indicates that there is no signal
 
Vparagone said:
It does log into the device and then I get a message indicating that it is attempting to get the date and time. The program delays a few seconds and then displays a time out message, proceeds with some messages about fiscal cameras and then stops.
If I go to the display screen, it indicates that there is no signal
Click to expand...
can you post a screen shot of the configuration page in blue iris as well as the error message you are getting?
 
I have the same problem. Been trying to get 2 DSC 5222L cameras working for 3 weeks with no success. Laptop built in camera works but can't connect to wireless at my home network or my remote camera. DLink light works.I'm at my wits end. E-Mailed BI and no response. Did I waste my money? Ispy will work. Any help would be greatly appreciated. I'm determined not to give up.
 
A K said:
I have the same problem. Been trying to get 2 DSC 5222L cameras working for 3 weeks with no success. Laptop built in camera works but can't connect to wireless at my home network or my remote camera. DLink light works.I'm at my wits end. E-Mailed BI and no response. Did I waste my money? Ispy will work. Any help would be greatly appreciated. I'm determined not to give up.
Click to expand...
Post an image of your configuration settings...it is setup incorrectly.
 
Where would they be?? the IP addresses or what do you need? Can't find a config page
 
Can't copy and paste config page. Just noticed I'm getting Audio but I get message No Signal. Socket Error 10053 so I guess it has to be connected to the camera somehow. Am I missing a codec? DSC 5222L
 
A K said:
Can't copy and paste config page. Just noticed I'm getting Audio but I get message No Signal. Socket Error 10053 so I guess it has to be connected to the camera somehow. Am I missing a codec? DSC 5222L
Click to expand...
take a screen shot.
Also the newest version released today has an improved inspect feature.
 
Does this help?


Opening port 81...
HTTP request...
OK
GetSystemDateAndTime...
2015-10-05T19:19:09.000Z
GetCapabilities...
Response!
requesting device information
Manufacturer: D-Link
Model: DCS-5222L
FirmwareVersion: 1.13
has Media services: /onvif/media_service
does not have RTSP/TCP
has PTZ services
Opening port 81...
GetSystemDateAndTime...
2015-10-05T19:19:12.000Z
GetCapabilities...
Response!
requesting device information
Manufacturer: D-Link
Model: DCS-5222L
FirmwareVersion: 1.13
has Media services: /onvif/media_service
does not have RTSP/TCP
has PTZ services
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done
 
@A KYou need to post a screenshot of the settings...if you want to do a teamviewer session I can better help you.
 
fenderman said:
@A KYou need to post a screenshot of the settings...if you want to do a teamviewer session I can better help you.
Click to expand...
I'll have to get it later. Have the router all screwed up now. I apriciate the help. I'm getting audeo but no signal.
 
You must log in or register to reply here.
Top Bottom