Configuring Ubiquiti NanoBeam AC Gen 2, Looking for help please.

[Happy Homes]

Hello. I have 4 NanoBeam AC units and 4 cameras will be installed on detached garages. I'm having trouble configuring them. I have logged in the portal, and assigned static IPs and turned on access point for the main unit. Cameras are still not popping on up my NVR. Can someone please help walk me through the process. Thank you much appreciate it.

 

[concord]

I don't have an NVR nor use Ubiquiti equipment, but suggest you specify make/model of NVR and cams being use. This will help people who are familiar with the type of equipment you have.

 

[Flintstone61]

The nano IP’s default is like 20 or 21. Need to get them all above 21. I don’t have my system in front of me but I assigned the remote DVR a.207 address. If youve got new cameras you’d have to plug them into a switch and probably change the default 108 address and create a list of Static IP’s.
so you can keep track of whats what.

 

[Flintstone61]

Ubiquiti Help Center

Find help and support for Ubiquiti products, view online documentation and get the latest downloads.

help.ui.com

 

[TonyR]

Follow the guide, step-by-step, here ==>>> airMAX - Configure a Point-to-Multipoint (PtMP) ISP-Style Access Point

Do the radio next to a cam one at a time; substitute your cams for the "computer" shown at each house, cams also assigned a unique static IP in the same subnet as the radios.

 

[Flintstone61]

Follow the guide, step-by-step, here ==>>> airMAX - Configure a Point-to-Multipoint (PtMP) ISP-Style Access Point

Do the radio next to a cam one at a time; substitute your cams for the "computer" shown at each house, cams also assigned a unique static IP in the same subnet as the radios.

Thanks TonyR