Configuring different IVS areas, some with and some without notifications

mephisto_uk

mephisto_uk

Getting the hang of it
Dec 13, 2020
175
96
London
Is possible to set up multiple IVS areas on a camera, for example, 2 intrusion detection zones, and have 1 to notify via push notification using the DMSS app via the NVR, and another zone that does not notify, but records when movement is detected? I want to be notified on a camera on a certain area, and another area I just want to have an entry on the NVR that there was movement in that area for future reference. Not sure if that is possible from the camera configuration? On DMSS app I could not find a way to control specific notification zones, only enable or disable IVS as a whole
 
Yes, but you would need two IVS rules on the camera to do so and then in the DMSS app you tell it which one to notify you.

My neighbor for example has one IVS rule send an email and the other IVS rule sends a push.
 
wittaj said:
Yes, but you would need two IVS rules on the camera to do so and then in the DMSS app you tell it which one to notify you.

My neighbor for example has one IVS rule send an email and the other IVS rule sends a push.
Click to expand...
pardon me if I'm being thick, but I cannot find a way to see any of the IVS rules on the DMMS app when accessing the camera:

1747662541921.png

It only gives me the option to switch on or off intrusion or tripwire, there is no way to access the rules I created on the camera:

1747662593795.png
 
You must log in or register to reply here.
Top Bottom