Channel 0 Will not work

[SpiralIPCT]

Hi, I made this in another thread and while the people that helped were great I still didn't find a successful conclusion to this so here we go again ¯\(ツ)/¯

I have a HiLook DVR (DVR-104G-K1) and all 4 channels on it work fine on RTSP, Using routes like /Streaming/Channels/101

But theres a channel called Channel 0 and is usually accessed with /Streaming/Channels/1 or /Streaming/Channels/001, but for me however, I get an error when attempting to play.

This ain't anything necessary, just wondering why its happening and also if there's a way to fix it either... Thanks for reading!

 

[alastairstevenson]

Excuse the dumb question - but have you enabled Channel 0? Disabled by default.

Configure Channel-Zero Encoding
Purpose
Enable the channel-zero encoding when you need to get a remote view of many channels in real
time from a web browser or CMS (Client Management System) software, in order to decrease the
bandwidth requirement without affecting the image quality.
Step 1 Go to Configuration > System > Live View > General.
Step 2 Set Video Output Interface as Channel-Zero.
Step 3 Go to Configuration > System > Live View > Channel-Zero.
Step 4 Check Enable Channel-Zero Encoding.

 

[wittaj]

Three different threads for same thing?

Keep it all to one thread or people will start to ignore you.

SpiralIPCT

ipcamtalk.com

Channel 0 Not working on HiLook DVR

Hey there, I made a thread about this in the wrong location so it's now done in the right location :) Anyhow Channel 0 (which combines all the channels of the DVR into one video) does not seem to work for me, I tried these urls: rtsp:/:::554/Streaming/Channels/1...

ipcamtalk.com

 

[SpiralIPCT]

Excuse the dumb question - but have you enabled Channel 0? Disabled by default.

That's my issue haha. There's no channel 0 options for my DVR which I find strange

 

[SpiralIPCT]

Three different threads for same thing?

Keep it all to one thread or people will start to ignore you.

SpiralIPCT

ipcamtalk.com

Channel 0 Not working on HiLook DVR

Hey there, I made a thread about this in the wrong location so it's now done in the right location :) Anyhow Channel 0 (which combines all the channels of the DVR into one video) does not seem to work for me, I tried these urls: rtsp:/:::554/Streaming/Channels/1...

ipcamtalk.com

Sorry.