CAT6 RJ45 connector that will fit 23 gauge wire...

[IPCamGuy77]

I've tried a couple of different brands of CAT6 RJ45 that are supposed to work with 23 gauge CAT6. Neither has the proper size inside to correctly accommodate the eight wires through to successful crimping.

Is there a specific brand of CAT6 rj45 connector that is proven to properly fit and work with 23 gauge wire?

 

[tigerwillow1]

I've gone through a lot of there with 23ga cat6, no problems: Monoprice 8P8C RJ45 Plug with Inserts for Solid Cat6 Ethernet Cable, 100 pcs/pack - Monoprice.com

 

[TonyR]

I've tried a couple of different brands of CAT6 RJ45 that are supposed to work with 23 gauge CAT6. Neither has the proper size inside to correctly accommodate the eight wires through to successful crimping.

Is there a specific brand of CAT6 rj45 connector that is proven to properly fit and work with 23 gauge wire?

+1 on those CAT-6 connectors from monoprice that @tigerwillow1 linked. I used them on 23AWG CAT-6 also from monoprice, just from amazon. They are for solid (not stranded) and are 2 piece; they include an insert that helps hold the conductors to insert into the staggered holes. Go ==>> here <<== for tips on how to use the 2 piece for staggered holes.

 

[Skeptical]

IPCamGuy77 I had the same issue. I returned what I had and ordered these https://www.amazon.com/gp/product/B07SQLBZJQ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 which worked.

I assume the monoprice ones the other two guys linked are probably better but if you only need a to make a few cables and want prime shipping what I lined will work just fine too.

 

[Holbs]

I prefer the 2 piece as mentioned above at work (must do 50-100 per month). They really help hold things together as you insert. Also, you can double check the color code before inserting.