Can't open Dahua camera from NVR

L

lukehimself

n3wb
Sep 22, 2022
12
4
Melbourne, Victoria, Australia
Hi all,

I've been reviewing a lot of your forum posts while setting up my Dahua NVR and cameras. This it toally new to me but I'm slowly getting through it!

Currently I have 4 cameras connected to PoE ports on the NVR and they are all viewable via the NVR's IP address/admin center.

The issue I'm facing is one of the cameras will just redirect back to the NVR IP when I try to open it using the blue IE icon. It tries to go correctly to 192.168.0.254:10080 (I added an except for 10080 in Chome).

I found some other posts about this but none worked. Any ideas?

Thanks in advance!
 
The gui looks the same for the NVR and the cameras - when you select the IE icon did you put in the user/pw of the NVR and does it do a loop back to the NVR gui or is it giving you then the camera gui?
 
Ive seen it redirect to the camera Edit screen (pencil icon) when there was an issue with an older camera… hmmm

@lukehimself can you show us a screen cap of your NVR camera registration page?
 
Has anybody had to resort to taking the URL spit out by the " Blue e" in NVR and pasting it into the " IE TAb" of the Chrome or Edge browser?
if I take this ---> (the link provided by "Blue E") it opens in Pale Moon, IE tabbed Chrome, but not Chrome, and probably not Edge ( didnt even bother)
 
Last edited:
Palemoon pasted from NVR URL
1663900832003.png
 
  • Like
Reactions: bigredfish
Chrome
1663900900378.png
 
IE Tab in Chrome
1663900957799.png
 
Yeah seems like a browser issue.I have most luck with IE and Pale Moon. Don’t use Chrome much
 
  • Like
Reactions: Flintstone61
whats the lan IP address of your BI computer? or the computer your browser is on.
 
Your using a computer to access Pale moon. What is the LAN IP address on that computer.
maybe your not on the same network segment
 
  • Like
Reactions: Parley
the e icon needs a browser to open. the browser resides on a PC....The PC has an IP address.
Maybe its not in the . . 0.xxx network
 
hmmm
 
Try moving/swapping places/ 2 cameras ethernet cables on back of NVR. and see if the problem follows the camera.
 
You must log in or register to reply here.
Top Bottom