Hi all,
Im hitting a brick wall here,
I have a dahua NVR4108-8p andI have 2 Dahua cameras connected to it and can access/view it from the NVR/remote software.
I however want to access the cameras directly to be able to change the additional features that come with the camera that can only be changed by accessing the camera directly.
I have tried the ways mentioned on this forum and this is where my problem starts.
By trying the method of plugging the network cable directly to the POE switch or from the NVR ethernet port to the POE switch and assigning a static ip,I can ping the NVR switch(10.1.1.1)but not the cameras.
Im Not sure if I am doing something wrong or if the NVR is blocking me.
Any advise would be greatly appreciated
Im hitting a brick wall here,
I have a dahua NVR4108-8p andI have 2 Dahua cameras connected to it and can access/view it from the NVR/remote software.
I however want to access the cameras directly to be able to change the additional features that come with the camera that can only be changed by accessing the camera directly.
I have tried the ways mentioned on this forum and this is where my problem starts.
By trying the method of plugging the network cable directly to the POE switch or from the NVR ethernet port to the POE switch and assigning a static ip,I can ping the NVR switch(10.1.1.1)but not the cameras.
Im Not sure if I am doing something wrong or if the NVR is blocking me.
Any advise would be greatly appreciated