Cannot connect to camera through PoE switch...

Moonville

Young grasshopper
Joined
Aug 9, 2021
Messages
56
Reaction score
21
Location
Ohio
I apologize but i'm by no means an expert so i'm somewhat learning as we go myself
No apology necessary - I greatly appreciate your help.

Get an extra ethernet cable and plug any of the 1-24 ports to your internet router and then plug your BI PC to the Brocade switch 1-24. What's the IP address on your BI PC after that?
I wasn't sure which NIC to do that with so I did it both ways. With the 2nd NIC there was no change from the 169*. With the native NIC the result was 192.168.1.95
 

elwood

Getting the hang of it
Joined
Oct 22, 2021
Messages
31
Reaction score
37
Location
Louisiana
No apology necessary - I greatly appreciate your help.


I wasn't sure which NIC to do that with so I did it both ways. With the 2nd NIC there was no change from the 169*. With the native NIC the result was 192.168.1.95
Do you have internet access? If so, and you want, install TeamViewer and PM me the ID/password and i'll remote in and figure out the Brocade IP and possibly get things running agian.
 
Top