Most cams in Blue Iris lose connection (No Signal) frequently and then minutes later connect again. Some more than others.
Cams:
8 Samsung Smartcams across 3 floors - all model, 6431BN
1 older Samsung Smarcam Pro version - on main fllor
1 RCA/LaView/Hikvision Doorbell cam - on main floor
Wifi:
Recently changed from ASUS AP to Unifi UAP-AC-LR
-- Unifi AP covers the entire house with a pretty strong signal, stronger than the ASUS did.
-- I have no 5G radio interference and very little 2G radios around me. All Cams are on 5G and set to channels/bandwidths that do not even come close to any other channels in use. I have also tried putting some on 2G, doesnt help.
As a test: ALL Samsung Wisenet cams can use the Android Samsung Smartcam+ app over the Internet via the Samsung proxy -- and ALL cams connect / show perfectly even when BI shows them as 'No Signal'
Is there a BI setting that could help or a Unifi setting that might fix this?
thx for the help
Cams:
8 Samsung Smartcams across 3 floors - all model, 6431BN
1 older Samsung Smarcam Pro version - on main fllor
1 RCA/LaView/Hikvision Doorbell cam - on main floor
Wifi:
Recently changed from ASUS AP to Unifi UAP-AC-LR
-- Unifi AP covers the entire house with a pretty strong signal, stronger than the ASUS did.
-- I have no 5G radio interference and very little 2G radios around me. All Cams are on 5G and set to channels/bandwidths that do not even come close to any other channels in use. I have also tried putting some on 2G, doesnt help.
As a test: ALL Samsung Wisenet cams can use the Android Samsung Smartcam+ app over the Internet via the Samsung proxy -- and ALL cams connect / show perfectly even when BI shows them as 'No Signal'
Is there a BI setting that could help or a Unifi setting that might fix this?
thx for the help