Camera's not connecting to NVR after Firmware Update

fabzster

fabzster

n3wb
Aug 13, 2015
1
0
Hi

My Setup was working and I decided to upgrade the firmware on the NVR and the Cameras,
I have indicated below what the original firmware under Original Setup and the upgraded firmware under Current Setup.


I now have 3 cameras that will not connect to the NVR indicated by (x) after I upgraded the firmware.


I have connected the one camera directly to my PC and it is functioning correctly, I defaulted the settings and tried to connect it to the NVR again, but it will still not detect it


Original Setup

DS-7616NI-E2/8P Firmware: V3.3.2 build 150522

DS-2CD2132-I Firmware: V5.1.6 build 140612

DS-2CD2112F-I Firmware: V5.2.0 build 140721
DS-2CD2112F-I Firmware: V5.2.0 build 140721

DS-2CD2032F-I Firmware: V5.3.0 build 150513
DS-2CD2032F-I Firmware: V5.3.0 build 150513

DS-2CD2032F-I Firmware: V5.3.0 build 150513

DS-2CD2032F-I Firmware: V5.3.0 build 150513

DS-2CD2032F-I Firmware: V5.3.0 build 150513

DS-2CD2032F-I Firmware: V5.3.0 build 150513



Current Setup:


DS-7616NI-E2/8P Firmware: V3.3.4 build 150616


DS-2CD2132-I Firmware: V5.3.0 build 150814

DS-2CD2112F-I Firmware: V5.3.0 build 150814 (x)
DS-2CD2112F-I Firmware: V5.2.0 build 140721

DS-2CD2032F-I Firmware: V5.3.0 build 150814 (x)
DS-2CD2032F-I Firmware: V5.3.0 build 150814 (x)

DS-2CD2032F-I Firmware: V5.3.0 build 150814

DS-2CD2032F-I Firmware: V5.3.0 build 150814

DS-2CD2032F-I Firmware: V5.3.0 build 150814

DS-2CD2032F-I Firmware: V5.3.0 build 150814



Please can you assist?

 
Use the custom downgrader is my signature, on the non working 5.30 cameras,
And re do the the time 5.20 with 5.20
If you want to upgrade to 5.30 on the 5.23 or below camera's
You have to do the mtd hack first if they are Chinese camera's
 
Last edited by a moderator:
fabzster said:
My Setup was working and I decided to upgrade the firmware on the NVR and the Cameras
Click to expand...
In future don't. Let it be a warning for others who decide to do this not to touch a working system for no reason.

Like whoslooking said, use his downgrader and get them back up and running first.
 
Great advice, thank you.

I have same problem. Will your downgraded work for my 5.3.0 camera too? It does not have "CH" in the serial.
 
whoslooking said:
Use the custom downgrader is my signature, on the non working 5.30 cameras,
And re do the the time 5.20 with 5.20
If you want to upgrade to 5.30 on the 5.23 or below camera's
You have to do the mtd hack first if they are Chinese camera's
Click to expand...

Ok Who's, so I tried the downgrader. The TF server does nothing after it states File transfer completed. Further, the camera drops the .64 IP address and is no longer reachable unless I power cycle it. Any ideas?
 
Using hiktools change the firmware region from EN to CH

Then try again that should help, if your camera is CH region.
 
Thank you Who's. I actually fixed them by updating the FW to a new version released by Hikvision Europe. My cameras are European ones.

Thank you,
EB
 
You must log in or register to reply here.
Top Bottom