Cameras Have Dropped Off of BI

K

ksnax

Young grasshopper
Jul 28, 2017
35
4
Really not sure what is happening here, but over the course of the last 12 hours, most of my cameras have dropped off from being accessible by BI. The viewer frames report no signal, but none of the IP addresses have changed, and three cameras served by an old Q-See DVR are reachable independently via the Q-See DVR viewer application using the normal static IP I have assigned to it. The three rainbowed panels are the Q-See cameras pictured below in the viewer application.

I'm able to remote in via Chrome Remote Desktop to my static server address as well without any trouble.

I have rebooted everything.

Any ideas?

I'm thinking it is something with my router, but I don't have any trouble with anything else on the same LAN, so not sure.
 

Attachments

  • Capture.JPG
    Capture.JPG
    274 KB · Views: 13
Why is the three vertical bars at the top of the screen red. Provide schreen shots of the status screens.

Can you log into the cameras via a web browser and see video?
 
  • Like
Reactions: Mike
Yes, I can view cameras directly outside of BI.

Here's the log. The force quits are for the Q-See DVR cameras.
 

Attachments

  • Capture.JPG
    Capture.JPG
    265.1 KB · Views: 3
Please provide a diagram of the network. Include routets and switches. Are the problem cameras hardwired or wifi ?
 
Check your network link speed. A damaged cable or network interface could have your BI machine dropping packets left and right.

Three of those cameras look to be analog cams hosted on the network by your DVR. Back when I used a setup like that (years ago), they dropped (in Blue Iris) regularly but always came right back...
 
I think I have isolated it to something like that either with my server or the network cabling. Moving cameras around to different ports makes no difference to which remain active, but I just setup a second BI demo server on my main PC and I am able to access some cameras that way.

I was fearing that the cameras themselves were hacked or something, being cheapo Chinese cameras with those backdoors verified to be present, but the Q-See DVR is older and not known to have that vulnerability (or at least has a different one that I AM aware of). I'll do some more checking on this and report back later now that it's not looking like a hack.
 
Last edited:
ksnax said:
I think I have isolated it to something like that either with my server or the network cabling. Moving cameras around to different ports makes no difference to which remain active, but I just setup a second BI demo server on my main PC and I am able to access some cameras that way.

I was fearing that the cameras themselves were hacked or something, being cheapo Chinese cameras with those backdoors verified to be present, but the Q-See DVR is older and not known to have that vulnerability (or at least has a different one that I AM aware of). I'll do some more checking on this and report back later now that it's not looking like a hack.
Click to expand...
check the firewall...bitdefender is a common offender.
 
You must log in or register to reply here.
Top Bottom