Hello everyone, I made a mistake when setting to https, since then I can no longer access the camera interface and can only access the NVR. What can I do?
Camera Web gui
- Thread starter gurkenhals
- Start date
You could assign your PC a static IP of 10.1.1.20, subnet mask 255.255.255.0 and plug the PC with a patch cable directly into one of the NVR's POE ports.
Then open a browser to 10.1.1.65:443 (the cam's IP + colon + HTTPS port number), assuming the default 443 is used.
If by some miracle you get into the cam's webGUI look for something like "Settings" => "System" => "Default" (or "Factory Default").
It's a Hail Mary but since you have "...a hard time getting to the camera" you have little to lose.
And now don't change stuff you don't know what it does LOL.
Changing cameras and NVRs to https doesn't make it any more secure and in fact gives a false sense of security.
Changing cameras and NVRs to https doesn't make it any more secure and in fact gives a false sense of security.
