I've mounted two cameras, at point 1 and 3 (actual mount points were higher than what I've planned, but ignore that for now).
Usually the street has good enough light for both cameras to stay in color mode.
Cameras:
1.
IPC-T2431T-AS 3.6mm
2.
IPC-T5442T-ZE
Every once a while the street light goes completely off (not sure why).
When the street is totally dark, the cameras start their
IR light.
I wanted to tune the night mode profile for
IPC-T2431T-AS but I noticed the IPC claims it is on day mode (however, IR is on), what should I do upgrade firmware or is it possibly a configuration issue?
The brighter image is from: IPC-T5442T-ZE and the other one is from
IPC-T2431T-AS.