Camera is triggering alarm; can't figure out why and need help reading logs

[amrogers3]

I've been dealing with this for a while. The alarm will randomly kick on during the day. I don't have any triggers set during daylight hours.

I have several cameras connected to a Dahua NVR. I checked the log on the NVR and it shows this:
I am not sure I am reading this correctly. Does this log from the NVR show the alarm input on the camera connected to Channel 3 is being triggered? I don't have any other cameras generating any logs during this time.


This is the log from the camera on Channel 3. But I think this is saying a local alarm is being triggered. Can anyone help me decipher these logs?



Not other logs from this timeframe are being generated on the NVR. This event lasted approx 20 sec

 

[looney2ns]

Make certain the cameras pigtail doesn't have any "alarm wires" that are touching each other.

 

[amrogers3]

@looney2ns
I do have alarm wires connected on this camera. I can take the camera down and look to see if any are touching. Might be hard to see though.
Thanks

 

[bigredfish]

Looks like its doing what its supposed to. What triggers the external alarm normally?