Camera Bricked after Update - No response on TFTP / Ping and Bootloop

D

dosordie

n3wb
Dec 1, 2015
2
0
Hello,

i bricked my DS-2CD2432F-IW after a Update vorm 5.2.5 to 5.3.0 :( Its a CN Camera and it was MTD hacked.
At all the Time the TFTP Server worked fine. But after this Update (via WebIF) there is even no response when Ping 192.0.0.64 after Boot. Camera is in Boot loop.

On my other Hikvision Cam the TFTP Server work fine, so there is no config Problem :(

Is there a chance to get the Cam back Working?
[MENTION][/MENTION]
Sorry for my bad English ;)

Greeds,

Dominik
 
Got it back Working :)

Great idea to set PC IP to 192.168.1.128... Thank you!!!
With this IP the Cam (192.168.1.64) connects to TFTP and im able to recover Firmware (i have to set lang to 1 in the 5.2.5 file)

But now im not able to connect via TFTP when PC is at 192.0.0.128... Only 192.168.1.128 is working for this cam.
How could this be?
 
Hello! I have several DS-2CD2432F-IW from China. Problem: none of these cameras are connected to the TFTP server. When turning on the camera there is no ARP-request, I look at the analyzer Wireshark. Sorry for my bad English ;)
 
You must log in or register to reply here.
Top Bottom