Camera’s fine wires connections — alarms, sound in and out

[master_tinkerer]

My new cameras have wires bundled with the network and power connections. I was wondering if anyone had found an effective connection / connector to make removable connections for these small wires. RJ45 socket could be used for alarms but sound in ( microphone) is usually shielded. Outdoor environment complicates the choices.
Just fishing for good ideas!
Thanks
I won’t use all the connections

 

[ludshed]

I always use scotch locks. If you’re planning on “tinkering” and need removable I guess tiny wire nuts would suffice.

 

[master_tinkerer]

I should have included a picture. The power is just test mode with tape. Two cameras from Empiretecandy.View attachment 191126

Edited above . Added picture

 

[Mark_M]

I use a little bit of electrical tape to cover the connections.
Terminal blocks or (as suggested) Scotchloks are good to connect wires to the camera's IO wires.

 

[looney2ns]

Small grey colored wire nuts work well.