Cam ptz problem

[x88dually]

Bought cams from Nelly's, model HNP104-IR/4X, but dont know what make and model they are. In web interface for each cam ptz is turned on.
But ptz doesn't work in BI.

How do i make it work in BI ??

 

[looney2ns]

In Bi, enter the IP address of the camera, the password an user name you set in the camera, then click find/inspect.
Read the BI help file.

 

[x88dually]

i just typed in address and password. thats it. so how do i get back to that now that cams are installed and being viewed ?

 

[djernie]

This would be helpful, also read through the wiki and cliff notes. Good luck.

 

[x88dually]

thats at initial set up, how about when set ups done, how do you get back to those settings after cams are running ?

 

[looney2ns]

Right click on the camera in question, then select the top entry in that popup menu. Seriously, read the help file.

 

[x88dually]

Been there done that.

Do i just have to delete the cams an start over ?

 

[x88dually]

This video doesnt show me how to get back to the initial settings.

Do i have to delete the cams and start over, yes or no ?

 

[djernie]

This video doesnt show me how to get back to the initial settings.

Do i have to delete the cams and start over, yes or no ?

The initial settings are in the top left of the bue iris window. The three horizontal lines.

 

[x88dually]

Been there, where do i check to record to disk ? I didnt find it.

 

[djernie]

Been there, where do i check to record to disk ? I didnt find it.

See if there is anything here.

Video Tutorials

IPCT member @[URL='https://ipcamtalk.com/members/dasstrum.26160/'][COLOR=#0000b3]Dasstrum[/COLOR][/URL] put together these great Blue Iris video tutorials for the community. You may view the original thread here...

ipcamtalk.com

 

[djernie]

Blue Iris 3.0 Clips and archiving question

Hey everyone, I have a 4TB drive installed that I use to just save my clips to. I'm not too sure how to get the settings right to utilize the whole disk and I've never been able to get it right. I have attached a screen capture of my settings. I just increased the Limit clip age to 90 days...

ipcamtalk.com

 

[x88dually]

On initial set up, I DIDN'T check record to disk. Now i want to, is the a box somewhere else in the 3 menus ? or delete cams an start over ?

 

[samplenhold]

On initial set up, I DIDN'T check record to disk. Now i want to, is the a box somewhere else in the 3 menus ? or delete cams an start over ?

You have a separate thread for this. It has been answered a few times on there. Read the help file. Check out the videos.

 

[looney2ns]

Been there done that.

Do i just have to delete the cams an start over ?

Apparently not. Page 71 in help