Hi,
I just wanted to come back to ensure I understand your ask.
Do you want the NVR by the TV just for viewing the cameras? If so you might be able to use something like nyar's RPii program.
https://www.ipcamtalk.com/showthread.php?t=9604
Here are three scenarios I've been thinking about.
1)
Completely separate camera network with the switch.
In this case the NVR/Cameras are completely separate from your normal network and you won't be able to access them over wifi or from outside your network/home.
2)
Link from POE switch to Network.
This means that you can access the NVR from your network and use the program above, but it does mean your cameras are all on your internal network. You can segregate them using different subnets, but it then starts getting a little complex.
3)
NVR to Network and cameras to POE ports in NVR
This means the cameras are off your network and only the NVR is exposed to your network.
But I'm assuming your trying to make the camera cable runs easier to the NVR.
I'm sure there are other options, but personally I'm using number three, with the NVR in the loft, but the cable runs allow me to do so.
Good luck.
Paul
Sent from my A0001 using Tapatalk