Bullet ptz focus issues

R

reeves1985

Pulling my weight
Sep 13, 2015
776
241
Can someone do me a favour and give me a run down of their full settings list.

I'm battling this issue with losing focus and its only happening at night.

I'm waiting for a more technical answer from Monica and the engineer but in the meantime I'd like too see if any of my settings are different.
 
Bummer, I take it you already tried reset? Did you try leaving focus on manual?
 
klasipca said:
Bummer, I take it you already tried reset? Did you try leaving focus on manual?
Click to expand...

I tried manual focus but I didn't leave it on long enough to test because if I do move the camera you have to manually refocus it, which isn't a good solution for me.

Tried reset but still the same
 
What does your image look like at night? Is it just not enough light to do an autofocus?
(I have yet to receive mine so I have no experience, just thinking out loud)
 
In case it is defective ask Monica if she can ship you the lens module without having to ship camera for repair back to them. I removed the module when I was troubleshooting the black screen the first day. Appears straightforward removal, but there is a sticker with void warranty if removed.
 
It looks completely out of focus and blurry

It's pitch black but using the built in ir
There's noting close for it to bounce off to cause it to go off focus for the main image
 
Oh and did you record a video when it becomes out of focus?
 
reeves1985 said:
Can someone do me a favour and give me a run down of their full settings list.

I'm battling this issue with losing focus and its only happening at night.

I'm waiting for a more technical answer from Monica and the engineer but in the meantime I'd like too see if any of my settings are different.
Click to expand...


1.PNG2.PNG3.PNG4.PNG5.PNG6.PNG7.PNG
 
reeves1985;61931semi-AUTO and 6m focus distance[/QUOTE said:
These were default settings on all of mine. What did you have yours set to?
Click to expand...
 
klasipca said:
These were default settings on all of mine. What did you have yours set to?
Click to expand...

I set it to auto and 1m
Because that's what I had set my speed dome too and its been fine.

Although I'm not actually sure what the distance option means or is for
 
There are several things that could cause the picture to be blurry. I am using manual focus and capture great license plate pics day or night

Can you actually post a video to youtube?
 
klasipca said:
Did you see my post above about asking Monica for module replacement?
Click to expand...

Oh no I hadn't seen it I'll have a look

- - - Updated - - -

Git said:
There are several things that could cause the picture to be blurry. I am using manual focus and capture great license plate pics day or night

Can you actually post a video to youtube?
Click to expand...

Once it goes blurry again I'll get the video uploaded so you can see
 
Note - are you aware of the manual focus buttons on the Live View View page under the PZT controls (focus+ and focus-)

Try changing to manual focus, get a nice sharp picture, leave it alone and see how it looks
 
Git said:
Note - are you aware of the manual focus buttons on the Live View View page under the PZT controls (focus+ and focus-)

Try changing to manual focus, get a nice sharp picture, leave it alone and see how it looks
Click to expand...

yeah I am aware of this but I do occasionally move it which to manually focusing gets a pain!
 
Update:

Problem still persists
Unfortunately I haven't had time to upload any video

I have however narrowed down the cause.

It happens every transition from daylight to night time.
This is where the problem seems to lie
 
reeves1985 said:
...I have however narrowed down the cause...It happens every transition from daylight to night time...This is where the problem seems to lie
Click to expand...

OK...shot in the dark: the transition from day to night means the camera IR lights up, correct? When this happens the camera draws more power. Just a guess but when the day to night transition occurs the camera may need to refocus to adjust to the lighting change. The refocus also drains power. Therefore, maybe, just maybe, the power being supplied to the camera at this precise point in time (IR lights and camera refocuses) is insufficient. How are you powering this camera? And do you have any alternative method to power the camera to disprove my theory? I'd suggest that you buy one of those TrendNet PoE+ adapters and see if that solves the issue.

Hey, did I ever tell you how they may have faked the moon landings?
 
You must log in or register to reply here.
Top Bottom